The Thermique™ thermal condenser gets hot only while it’s in the canal. You don’t have to repeatedly heat your instrument in an open flame, so an apprehensive patient never glimpses the red-hot condenser flashing by his face.

The proportional feedback system maintains a precise temperature (+ 15°C) at a precise depth within the canal for predictable gutta-percha flow and minimal generation of smoke and fumes.

Here’s how it works

Simply select the condenser tip that corresponds to the canal size and set the stop 5-7mm short of the apex. After cementing the master cone and placing one or two accessory cones, insert the condenser to the indicated depth, and depress the finger control for 2-3 seconds.

The tip instantly heats to the pre-selected temperature, causing the gutta-percha to flow against the sidewalls, and into lateral canals. The combination of heat and pressure fuses the cones into a single, dense mass.

When you release finger-pressure, the condenser cools as fast as it heated. As soon as you remove it, you’re ready to backfill.

Enough power for your busiest day

The Thermique gives you massive battery capacity (3 amp hours), so you can work a full day without recharging. Before you go home, just plug it in. It’ll fully recharge before you arrive the next morning.

A warning light tells you when battery voltage is getting low. If you ignore this warning and keep working, the device will automatically shut itself off when power gets too low to maintain the selected temperature.

Special safety circuits automatically disable the device in case of electrical malfunction and prevent use when the charger is plugged into the back of the device.

A 5-year warranty ... and 3-month money-back trial


Like all Parkell electronics, the Thermique thermal condenser is protected by a five year warranty on parts and labor. (The tips and battery are consumable items and are only warranteed against defects.)

And we give you three full months to see if thermal condensation fits comfortably into the way you practice endo.

If you decide the Thermique isn’t for you, simply call us any time within the trial period. We’ll have it picked up at our expense ... we’ll give you all your money back, including shipping and taxes ... and we’ll politely thank you for trying it.

  • Thermique™ thermal gutta-percha (ID530): $699 Includes power unit with handpiece, charger, three autoclavable calibrated tips (small, medium, and large.)
    Replacement Tips: $59.95 ea.
    Small: Stock No. ID531
    Medium: Stock No.ID532
    Large: Stock No. ID533

    Designed, Manufactured and serviced by Parkell, Inc., USA.



Includes three tips with tapers calibrated to small, medium, and large gutta-percha cones.



At 200°C working temperature, the Thermique targets the heat. Only the tip and lower 1/3rd of the condenser are heated. The coronal portion remains much cooler. This reduces unnecessary gutta-percha melting and excessive fumes.