The Sensimatic 700SE Electrosurge:
The Best Electrosurge Unit
Just Got Better (and Smaller!)
The Sensimatic 700SE Electrosurge has all the benefits and features of the company’s previous award-winning electrosurges, but in a smaller unit with a more compact footprint!
The new Sensimatic 700SE Electrosurge is very easy to use. Simply flip the switch, select the operation mode (CUT, CUT/COAG, COAG), power output (10 levels available), and you’re ready to operate. Its low-impedance circuitry adjusts the power level to compensate for tissue depth variations during operation. Coupled with the unit’s stable voltage circuitry, you get superb, constant cutting efficiency—even when penetrating highly vascularized tissue.
Parkell spared no expense when it came to making sure the Sensimatic 700SE is safe for both the doctor and patient. It has all of the safety features found in the Sensimatic 600SE, including the unit’s special electronic sentry circuit that protects against electrical malfunction. The sentry circuit compares the electrode output with the control settings—if there’s any discrepancy, it will quickly and safely deactivate the unit.
The Sensimatic 700SE also features an LED light on the display panel plus an audible tone to let you know when the output is active.
Six electrodes and an inert, high-temperature Delrin® resin handpiece are included to handle all electrosurgical procedures with precise accuracy and quality tissue healing. Along with the unit’s power and operation mode versatility, the Sensimatic 700SE is fully capable of covering everything from crown and bridge procedures to fulguration.
Try the Sensimatic 700SE in your operatory for three months risk-free. If it’s not for you, send it back during the trial period and we’ll fully refund your purchase, including original ground shipping charges. Hold on to it and you’ll enjoy complete peace of mind with Parkell's unbeatable five-year power-unit warranty on the 700SE and one-year warranty on all external components (except the electrodes).
- Power requirements: Line Voltage – 117 Volts +- 10% AC, 60 Hz, 2 amps maximum
- Optional 220 Volts +- 10%, 50/60 Hz, 1.2 amps maximum
- Fuses – 2.5A, 120/230V, Type T (both line and neutral fused)
- Operating Frequency – 1.4-1.7 MHz (megacycles)
- Maximum Power Output – 50 Watts rms (at 400 Ohm load) approximate
- Maximum Output Voltage (no load) – 290 Volts rms
- Size: 3 ¼”H x 7 ¾”D x 9 ¼”W (83mm x 197mm x 235mm)
- Weight: 6.1 pounds (2.8 kilograms)