Good-looking posterior restorations for patients where speed, ease of application and cost are important. The idea behind HyperFIL™-DC is really very simple: reduce the steps necessary to create a posterior composite restoration. Make the procedure easier ... faster ... less expensive. One-shot placement. After completing the prep and curing the bonding agent, just express HyperFIL-DC directly from the cartridge into the preparation. As it first comes out of the cartridge, HyperFIL-DC flows slightly to conform to the tooth surface. There’s no need for a flowable liner - or incremental curing. Once you’ve expressed the material, just zap the surface for 30 seconds with any curing light. You’re now ready to begin finishing. Great for squirming kids ... A 20g (10 ml) cartridge of HyperFIL-DC costs $59.98. That’s $3 per gram. In contrast, traditional posterior composites cost about $17 per gram. Even allowing for the material you leave in the mixing tip, HyperFIL-DC will reduce your material costs substantially. But the real saving isn’t in the cost of the material. It’s in the time you save. If you use Brush&Bond® as your bonding agent, the entire bonding-building-curing procedure shouldn’t take more than 5 minutes. Don’t misunderstand, we’re not claiming that HyperFIL-DC will fill all your posterior restorative needs. For example, there’s the matter of contacts. HyperFIL-DC’s flowability eliminates the need for a liner. But it also means you can’t push the material around to close a contact. Though some users report creating good contacts using sectional matrices, we suspect most dentists would find it easier to simply switch to a traditional composite when the restoration includes proximal contacts. And HyperFIL-DC may not be for you super-cosmedontists either. It comes in a single universal shade (a translucent A2/B2). This translucency gives it a chameleon quality and improves its depth of light-cure. But if the mere thought of a “one-shade-fits-all” strategy makes you cringe, this product probably isn’t for you. Three full months to decide. If you decide HyperFIL-DC isn’t what you’re looking for, call us within 3 months. We’ll have the material picked up at our expense, and we’ll refund all your money. HyperFIL™ 10ml Cartridge (S326): $59.98. Fits 10ml cartridge gun. Includes mixing tips and intraoral mini-tips. Mixing Gun for 10ml Cartridge (S327): $49.98
SPECIAL OFFER #1 – Save $25
|
 |
  Despite its 80% inorganic filler content, HyperFIL expresses easily and polishes nicely. (In this case the restorations were sealed with DuraFinish glaze.)  When bulk-placed and bulk-cured in deep Class I preparations, HyperFIL-DC restorations consistently creates gap-free interfaces. (The bonding agent here was Brush&Bond.)
Brush&Bond is one of the few self-etch bonding agents documented by multiple sources to reliably bond dual-cure resins. Because of that, its ease of use, and its proven ability to prevent sensitivity, Brush&Bond was the standardized bonding agent during laboratory and clinical development of HyperFIL-DC. You might say, quite literally, that HyperFIL-DC was “made for” Brush&Bond. Nevertheless, HyperFIL-DC does work with many other bonding agents. To find out if your favorite bonding agent is compatible, just call the manufacturer and ask if it can be used with dual-cure composites. For more information about Brush&Bond click here.
|
